Put a YouTube, Vimeo or Facebook video, or an IP camera, on a slide
Paste a link and the video plays right on your slide when it goes live, or type a network camera's address to show its picture. No downloading, no capture card.
On this page
A missions update on YouTube, a guest speaker's message on Vimeo, a church's live on Facebook: you can put any of them on a slide by pasting its link. The video plays from the website when the slide goes live, so there is nothing to download and nothing to switch away to in the middle of the service.
Add a video to a slide
- Open a presentation in the Slide Editor, or start one: click New Presentation in the Presentations tab, give it a name and a size, then Create presentation.
- Click Show tools, then the Advanced elements button in the row of tool icons.
- Choose YouTube, Vimeo or Facebook.
- Paste the video's link into the box. The video's picture and title appear so you can check it is the right one.
- Choose where it plays, then click Add to slide. Pressing Enter after pasting adds it straight away.
Choose where it plays and when it starts
| Setting | What it does |
|---|---|
| Cinema | A large picture in the middle of the slide, with room around it. |
| Full screen | Fills the whole slide. |
| Corner | A small picture in a corner, so your text stays readable beside it. |
| Bubble | A round picture, good for a speaker's face. |
| From | Starts the video at this time, for example 1:30 to skip an intro. YouTube and Vimeo. |
| Until | Stops at this time instead of the end. YouTube only. |
| Loop | Starts again when it ends. YouTube and Vimeo. |
| Captions | Shows the video's own captions when it has them. YouTube and Vimeo. |
Size, frame, sound and preview
The video is an element like any other: drag it to move it, pull a corner to resize it. When it is selected, the toolbar above it sets how the picture fits its box (Cover, Contain or Fill), its shape, a Frame around it, and its Sound, including mute and volume. Press Preview on the video to play it in the editor before the service.
Facebook videos and lives
Facebook works the same way: paste the link of a video or a live and click Add to slide. It starts by itself when the slide goes live and follows the slide's mute and volume.
Show an IP camera on a slide
Many churches already have a network camera: a PTZ camera, a camera in the nursery or one watching the overflow room. If it offers an rtsp:// address, it can go straight onto a slide, with no capture card and no extra software.
- In Advanced elements, choose IP camera.
- Type the camera's address, starting with rtsp:// (or rtsps://). You will find it in the camera's manual or on its web page.
- If the camera asks for a login, type its user name and password, then click + to add it to the slide.
- The camera's user name and password are kept encrypted on this computer, never in the slide file, so sharing the presentation never shares the login.
- In the editor the camera shows as stripes. The picture plays on your screens and monitors when the slide is live.
- If a camera shows nothing for a few seconds, the slide tells you to check the address and the login.
Before the service
- These videos play from YouTube, Vimeo or Facebook, so the computer needs internet while the slide is live. For a video you must not lose, download it with permission and play it from the Videos tab instead. See Play a video on your screens.
- Preview each video once before the service, so you know it still exists, is still public and starts where you expect.
- Videos you have added before are listed under Used before, so you can add them to another slide with one click.
- Only show videos your church has the right to show. A public video is not always free to play to a room.
Was this helpful?
Your answer helps us improve this guide.
More in Slides & presentations
- Use the four slide lanesKeep the sermon, announcements, lobby loop and timer ready at once. Send a deck to the lane you want, rename lanes, and switch off the ones you don't use.
- Design your own slides in the Slide EditorCreate a presentation, add text, shapes and images from the side rail, manage pages, and know that everything saves itself as you work.
- Add a QR code to a slideMake a code for your giving page, Wi-Fi, connect card or sermon notes in the QR studio, check that it scans, and reuse it on any slide.
- Add entrance animations and slide transitionsChoose how text and shapes appear on a slide, and how one slide changes to the next, without overdoing it.